Actuonix PQ12-R Linear Actuator 20mm, 30:1, 6V, RC Control

ActuonixSKU: RB-Fir-163
Manufacturer #: PQ12-30-06-R

Price  :
Sale price $70.00

Shipping calculated at checkout

Stock  :
Only 1 unit left

Payments and Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Actuonix PQ12-R Actuator 20mm, RC Control
  • Input voltage: 6 VDC
  • Peak power point: 15 N @ 15 mm/s
  • Gear ratio: 30:1
  • Max speed (no load): 28 mm/s
  • Stall current: 550 mA

The PQ12-R Linear Actuator 20mm, 30:1, 6V, RC Control operates as a direct replacement for standard rotary servos. It uses the same standard 3 wires connectors, ground, power, and control. Regardless of how you drive your servos, driven with an RC receiver, an Arduino board, or a VEX micro-controller, the PQ12-R servo perfectly replaces a regular servo with the added benefit of providing linear motion.

The -R actuators are ideally suited to use in robotics and radio control models. They are a direct replacement for regular radio-controlled hobby servos. The desired actuator position is input to the actuator on lead 1 as a positive 5 Volt pulse width signal. A 2.0 ms pulse commands the controller to fully retract the actuator and a 1.0 ms pulse signals it to fully extend.

If the motion of the actuator, or of other servos in your system, seems erratic, place a 1–4Ω resistor in series with the actuator’s red V+ lead wire.

The PQ12–R Linear Servos are designed to work with typical RC receivers and battery packs. Consequently, they also are compatible with Arduino control boards, VEX Microcontrollers, and many other similar boards designed for robotics.

PQ12-R Linear Actuator 20mm, 30:1, 6V, RC Control - Click to Enlarge

  • 1 x PQ12-R Linear Actuator 20mm, 30:1, 6V, RC Control
  • 1 x Accessories set
  • Gearing ratio: 30:1
  • Peak power point: 15 N @ 15 mm/s
  • Peak efficiency point: 8 N @ 20 mm/s
  • Max speed (no load): 28 mm/s
  • Max force (lifted): 18 N
  • Max side Load: 5 N
  • Back drive force: 9 N
  • Stroke: 20 mm
  • Input voltage: 6 VDC
  • Stall current: 550 mA
  • Mass: 15 g
  • Operating temperature: -10 to +50 °C
  • Positional accuracy: ±0.1 mm
  • Duty Cycle: 20%
  • Audible noise: 55 dB @ 45 cm
  • Ingress protection: IP-54
  • Feedback potentiometer: 5kΩ ±50%
  • Limit switches: Max. current leakage: 8uA

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dwayne Hill
EXCELLENT

Again, using these servos to control diving on an 8 foot submarine that comes in at just over 100 pounds. Servo is smooth and performs VERY well.

D
Dwayne Hill
EXCELLENT

Just ordered 2 more of these Actuators to control diving and surfacing on 2 more of my 1:48 scale submarines. These units are great, very robust and strong. Will be ordering more this winter when I refit my fleet!

D
Dwayne Hill
Excellent

Using this Actuator to control diving and surfacing on an 8 foot long RC submarine, Gear ratio is right on, and operations is VERY smooth. I will need to order more :)

Estimate shipping

You may also like