Motor Paso a Paso 3V 1.7A 68oz-in

Sparkfun ElectronicsSKU:RB-Spa-983
Número de fabricante: ROB-10846

Precio  :
Precio de oferta $21.50

Envío calculado al finalizar la compra

Stock  :
Solo quedan 2 unidades

Pagos y Seguridad

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Descripción

  • Motor paso a paso bipolar de 68 onzas
  • Ángulo de paso (grados): 0,9
  • Par de retención: 48N.cm
  • Factor de forma NEMA 17

El Motor Paso a Paso 3V 1.7A 68oz-in es una manera excelente de hacer que las cosas se muevan, especialmente cuando el posicionamiento y la repetibilidad son una preocupación.

Archivo PDF

  • Tensión nominal: 3V
  • Corriente clasificada: 1.7A / fase
  • Diámetro del eje de transmisión: 5 mm
  • Fase 2

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Brian
The Stepper Motor works as expected....

A few comments on the 3V 1.7A 68oz-in Stepper Motor - RB-Spa-983 - Works great, fits perfectly into my existing Nema 17 motor mount. - You may want to consider a heat sink on your Stepper Driver as the 1.7A current required for the motor will definitely warm up your driver. - The only fault with the motor is that the shaft is not ground flat on one side.("D" shape) I should say that the documentation was not misleading I just missed that point when viewing the drawing. - Always fast delivery from Robot Shop !!

M
Mick
Very good

As described, Fits NEMA 17 profile. Good replacement or for new builds. Drives a 8mm projector telecine very well.

T
Thant
Awesome steppers

Depending on the driver you're trying to use, you might not need 0.9' step angle. I'm using DRV-8825 and it's probably an overkill for me. I could have gone with 1.8' step angle but I got these anyway because I can repurpose them for other projects. I wish it comes with a connector plug. As it is right now, the cables are too long for my project and if I cut it, I might regret it later. I also ordered some standard NEMA 17 mounts and these steppers fit perfect. The mounting screws need to be the perfect length or you'll need some washers.

Estimar envío

También le puede interesar