Placa de Desarrollo de Microcontrolador USB Teensy 4.0

PJRCSKU:RB-Pjr-18
Número de fabricante: Teensy 4.0

Precio  :
Precio de oferta $23.80

Envío calculado al finalizar la compra

Stock  :
En existencia, 34 unidades

Pagos y Seguridad

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Descripción

  • 1x Placa de Desarrollo de Microcontrolador USB Teensy 4.0
  • ARM Cortex-M7 a 600 MHz
  • RAM de 1024K (512K está estrechamente acoplado)
  • Flash de 2048K (64K reservado para recuperación y emulación EEPROM)
  • 2 puertos USB, ambos 480 MBit/seg.
  • 3 Bus CAN (1 con CAN FD)
  • 2 I2S Audio digital
  • 1 S/PDIF Audio digital
  • 1 SDIO (4 bit) SD nativa
  • 3 SPI, todos con FIFO de 16 palabras
  • 3 I2C, todos con FIFO de 4 bytes
  • 7 Serial, todos con FIFO de 4 bytes
  • 32 Canales DMA de propósito general
  • 31 Pines PWM
  • 40 Pines digitales, todos con capacidad de interrupción
  • 14 Pines analógicos, 2 ADC en chip
  • Aceleración Criptográfica
  • Generador de números aleatorios
  • RTC para fecha/hora
  • FlexIO programable
  • Pipeline de procesamiento de píxeles
  • Disparo cruzado periférico
  • Administración de encendido/apagado

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Ainul
Fast Shipping, Original Product

Thank you robotshop for fast shipping and processing

A
André
Delivery

Arrived this morning, great packaging!

J
Jure
Excelent

Quick delivery. Very powerfull device for a good price.

K
Karl
Gread Dev board for the price!!

I'm surprised at how small this dev board (the length is almost less than an inch) and even more when it did run in 600mhz. Overall, this is a great value and will recommend to everyone who wants the best performance dev board in early(Q1) 2020.

B
Brian
Great performance in a small package!!

I am building a self balancing robot and, but wasn't able to achieve the cycle times I wanted with the Arduino Nano. The software of the robot that I was trying to emulate was running on a Rasp Pi, but I didn't want that added complexity, so I tried the Teensy 4.0. Running at 600mhz I immediately noticed a vast improvement in the stability performance of my robot. The only thing to watch for is the Teensy 4.0 is not 5volt tolerant so you may have to use logic level convertors. Also, there is plenty on documentation on https://www.pjrc.com/teensy

Estimar envío

También le puede interesar