Payments and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
- 4x 1MP OV9281 global shutter camera module with low distortion M12 lens
- 1x Arducam Camarray quadrascopic stereo camera HAT
- 4x 150 mm / 6 inch 22-pin to 22--pin camera cable
- 1x 300 mm / 12 inch 15-pin to 22-pin camera cable
- 1x 73 mm / 2.87 inch 15-pin to 22-pin camera cable
- 4x M2.5 x 10 mm Nylon Hex Standoff
- 4x M2.5 Nylon Nut
- 4x M2.5 x 6 mm Nylon Screw
Size
- Lens: 14 x 15.6 mm
- Board Size: 40 x 40 mm
- HAT Size: 65 x 56 mm
Camera
- Sensor: Monochrome global shutter OV9281
- Pixel Size: 3 μm x 3 μm
- Active Array Size: 1280 x 800
- Optical Size: 1/4 inch
- Focusing Range: 30 mm ~ infinite
- IR Sensitive: No IR filter, sensitive to IR
- Output interface: 2-lane MIPI serial output
- Video Modes: 8-bit RAW, 45fps at 1280*4 x 800 with Arducam driver on Jetson Nano/Xavier NX; 30fps at 1280*4 x 800 with Arducam driver on Rpi
Lens
- Optical Format: 1/2.7 inch
- Distortion: <1%
- Effective Focal Length: 2.8 mm
- FOV on 1/4 inch RPi Camera: 75° (H)
- F/NO: 2.8
- Mount: M12
- Weight: 4 g
Camarray Quadrascopic Stereo Camera HAT
- Support Raspberry Pi 3B/3B+/4B and Jetson Nano/NX
- Two/Three/Four MIPI camera inputs and one MIPI camera output
- Support 1/2 lane MIPI cameras input up to 1Gbps/lane
- Support 2 lane MIPI output up to 1Gbps/lane
- Support RAW8/RAW10/RAW12 output format, the output format automatically changes with the input format
- Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support Arducam cameras up to 12MP with proprietary camera driver with full resolution combine
- Support Two/Three/Four MIPI camera side-by-side combine, channel 0/1/2/3 software switching on the fly