Payments and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Arduino Make Your UNO Kit
- 1x Make Your UNO PCB
- 1x USB C Serial Adapter Board
- 7x Resistor 1k Ohm
- 2x Resistor 10k Ohm
- 2x Resistor 1M Ohm
- 1x Diode (1N4007)
- 1x 16 MHz Crystal
- 4x Yellow LED
- 1x Green LED
- 1x Push-Button
- 1x MOSFET
- 1x LDO (3.3 V)
- 1x LDO (5 V)
- 3x Ceramic Capacitor (22 pF)
- 3x Electrolytic Capacitor (47 uF)
- 7x Polyester Capacitor (100 nF)
- 1x Socket for ATMega 328p
- 2x I/O Connectors
- 1x Connector Header 6 pins
- 1x Barrel Jack Connector
- 1x ATmega 328p Microcontroller
Arduino Audio Synth
- 1x Audio Synth PCB
- 1x Resistor 100k Ohm
- 1x Resistor 10 Ohm
- 1x Audio Amplifier (LM386)
- 1x Ceramic Capacitor (47 nF)
- 1x Electrolytic Capacitor (47 uF)
- 1x Electrolytic Capacitor (220 uF)
- 1x Polyester Capacitor (100 nF)
- 4x Connector Pin Header
- 6x Potentiometer 10k Ohm with Plastic Knob
Spare Parts
- 2x Electrolytic Capacitor (47 uF)
- 2x Polyester Capacitor (100 nF)
- 2x Ceramic Capacitor (22 pF)
- 1x Push-Button
- 1x Yellow LED
- 1x Green LED
Mechanical Parts
- 5x Screw Nut
- 5x Spacer 12 mm
- 2x Screw 12 mm
- 11x Spacer 6 mm
Size
- Speaker Diameter: 45 mm
ATMega328P Processor
- Memory: AVR CPU at up to 16 MHz | 32kB Flash | 2kB SRAM | 1kB EEPROM
- Security: Power On Reset (POR) | Brown Out Detection (BOD)
USB-C Serial PCB Board
- ATMega16U2 Processor: 8-bit AVR RISC-based microcontroller
- Memory: 16 KB ISP Flash | 512B EEPROM | 512B SRAM | debugWIRE interface for on-chip debugging and programming
- Power: 2.7 V - 5.5 V
Audio Synth Shield
- Potentiometers: 5x 10kΩ - Trimmer potentiometer - User programmable | 1x 10kΩ - Trimmer potentiometer - Directly connected to the audio amplifier
Audio
- Amplifier (LM386): Class-AB | 4Ω Load | 0.325 W
- Speaker (L50EJ): Impedance at 2kHz: 8Ω | Max Power 0.5 W | Output: 81 dB +-3 dB
- Weight: 48 g