Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Geckodrive G540 4-Axis Digital Stepper Motor Driver
Capable of driving four independent motors
Integrated DB25 connector
Runs a stepper motor up to 3.5A and 50VDC
Motor Control Type: Stepper
The Geckodrive G540 4-Axis Digital Stepper Motor Driver is designed to run a large stepper motor efficiently and inexpensively. This is made possible due to its CPLD design, which moves most formerly analog operations to firmware while still maintaining its large dual H-bridge power section.
Its oversized MOSFETs can run a stepper motor up to 3.5A and 50VDC without issue, pushing its motor range to NEMA 17s through 34s.
The motherboard has an integrated DB25 connector for connecting directly to a computer via a parallel port or a third-party motion controller. Motor connections are made through DB9 plugs, which are included with the drive, and current can be set differently on each axis via a current set resistor.
The G250X, the heart of the G540, features proprietary anti-resonance and motor smoothing techniques. At a native ten micro-step resolution, the G250X does not require extremely high input frequencies to operate at high speed but offers enough resolution to match the accuracy of most stepper motors (+/- 5% of one full step).
1 x Geckodrive G540 4-Axis Digital Stepper Motor Driver
Native Resolution: Full Step, Half Step, 5uStep, 10uStep
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.