Leo Rover v1.8 (Assembled)

fictionlabSKU: RBC-Kel-03
Manufacturer #: LeoRover-Assembled

Price  :
Sale price $5,773.95

Shipping calculated at checkout

Stock  :
Only 1 unit left
Maximum 2 lipo products per cart

Payments and Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Leo Rover v1.8 (Assembled)
  • Features a 4WD outdoor robotics kit
  • Open-source and built on RaspberryPi
  • Designed to be reliable, watertight, and extendable
  • Payload capacity: ca. 5 kg
  • Video streaming and driving UI ready out-of-the-box

The Leo Rover v1.8 (Assembled) features a 4WD outdoor robotics kit and is designed to be reliable, watertight and extendable.

It uses 4 in-hub DC motors with 73.2:1 planetary gearbox and 12 CPR encoder and drives on 4 wheels with 130 mm diameter and rubber tires with foam insert (non-pneumatic).

Leo Rover v1.8 (Assembled) - Click to Enlarge

The estimated maximum obstacle size is 70 mm while running circa 4 hrs of nominal driving. While live video streaming you can connect to the Leo Rover up to a distance of 100 meters. Its camera has a resolution of 5 MPx and uses a Fisheye lens with a 160 deg field of view.

Leo Rover v1.8 (Assembled) - Click to Enlarge

By default Leo Rover is remotely controlled with video streaming and UI ready-to-go. It's not autonomous, but it's autonomy-ready. The software is based on Ubuntu 20.04 and Robot Operating System (ROS) which is known for easiness of autonomy and semi-autonomy features implementation.

The simplest way is to add a lidar or stereovision camera to enhance the Rover self-navigation and then build your features on top of that. The Rover itself has one front camera and 4 wheel encoders on board, so it provides video streaming and basic odometry out-of-the-box.

Leo Rover v1.8 (Assembled) - Click to Enlarge

Please note: As the manufacturer constantly works on improving the design, the Rover you receive may look and act little differently than seen in the videos and demos.

  • 1x Leo Rover v1.8 (Assembled)
  • 1x Battery charger
  • 1x Hex-head screwdriver to mount/dismount additional modules
  • Access to the official community Slack pivate channel for support, troubleshooting and help with integrations

 

Size

  • Weight: 6,5 kg
  • Size: 448 x 425 x 305 mm
  • Payload capacity: ca. 5 kg

Upper platform mounting Size

  • Size: 299 x 183 mm
  • Hole grid: 18 x 15 mm
  • Holes: 40 x Φ 7mm + 22 x Φ 5,5 mm

Performance

  • Estimated maximum obstacle size: 70 mm
  • Protection rating: complies with IP55 (not certified)
  • Run time: Estimated 4 hrs of nominal driving
  • Connection range: Up to 100 m (with live video stream)

Wheels

  • Motors: 4 x in-hub DC motor with 73.2:1 planetary gearbox and 12 CPR encoder
  • Wheel diameter: 130 mm
  • Tire material: rubber with foam insert (non-pneumatic)

Battery

  • Voltage: 11.1 V DC
  • Capacity: 5000 mAh
  • Type: Li-Ion with internal PCM Short-circuit, overcurrent and overdrain safety features
  • Max. current: 8 A (total for the whole Rover)

Camera

  • Camera resolution: 5 MPx
  • Lens: Fisheye with 160 deg field of view (IR non-filtered; night-vision allowed)

Network

  • WiFi 2.4 GHz access point with external antenna
  • WiFi 2.4 GHz + 5 GHz on internal RPi antennas for connectivity

Software

  • Operating system: LeoOS based on Ubuntu 20.04 + ROS Noetic. ROS2 support
  • Ready-to-go UI located under '10.0.0.1' when using standard Leo Software Image
  • Open source firmware

Electronics

  • RaspberryPi 4B 2GB (or higher) as the main computer
  • LeoCore as real-time microcontroller: STM32F4 (@84MHz, 64KB RAM, 256KB Flash)

Speed

  • Max. linear speed: ca. 0.4 m/s
  • Max. angular speed: ca. 60 deg/s

Connection interfaces - Externally available

  • 1x Waterproof microUSB Socket
  • 1x Antenna RP-SMA Male Socket
  • 1x 3-Pin Weipu SP13 12V Power Socket

Connection interfaces - Internal open interfaces

  • RaspberryPi's: 2x USB, 20x GPIO, RJ45 Ethernet, 1x RPi display port, Bluetooth 5.0 with BLE

Controller

  • You need any web-enabled device to access stock UI under '10.0.0.1' in your browser.
  • Device requirements: Windows/Linux/Android/macOS
  • For easier development ROS on your device is highly recommended.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like