Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Pololu DRV8434A Stepper Motor Driver Carrier
Offers micro stepping down to a 1/256-step
Operates within a 4.5 to 48 V voltage range
Features integrated stall detection for efficiency
Provides built-in protection against under-voltage, over-current, and over-temperature
Compatible with popular A4988 carriers
The Pololu DRV8434A Stepper Motor Driver Carrier is a breakout board designed for Texas Instruments' DRV8434A micro stepping bipolar stepper motor driver. This device offers micro-stepping capabilities down to a 1/256 step and operates within a voltage range of 4.5 to 48 V. It is capable of delivering approximately 1.2 A continuously per phase without the need for a heat sink or forced airflow and can peak at 2 A.
The driver is equipped with integrated stall detection and employs a ripple control algorithm. This feature allows for precise regulation of the current level, thereby enhancing the efficiency of the motor. The module's pinout and interface bear a striking resemblance to the popular A4988 carriers, making it a suitable replacement for those boards in a variety of applications.
The device also comes with built-in protection against under-voltage, over-current, and over-temperature conditions, ensuring safe and reliable operation.
Please note that despite its robust design, the device should be operated within the specified voltage and current limits to prevent damage due to under-voltage, over-current, or over-temperature conditions.
1x DRV8434A Stepper Motor Driver Carrier
1x16-Pin Breakaway 0.1-inch Male Header
0.6 x 0.8 inch
Minimum operating voltage: 4.5 V
Maximum operating voltage: 48 V
Continuous current per phase: 1.2 A
Maximum current per phase: 2 A
Minimum logic voltage: 1.8 V
Maximum logic voltage: 5.5 V
Microstep resolutions: full with 100% current, full with 70% current, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.