Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Seeedstudio Grove Thermal Imaging Camera / IR Array MLX90640 55 Degree
Equipped with a 32x24 array of thermal sensors
Compatible with Arduino, Seeeduino, and Raspberry Pi boards
Operates at a voltage of 3 - 3.6 V, consuming ~18 mA
Provides accurate temperature detection from -40 to 300 °C
The Seeedstudio Grove Thermal Imaging Camera / IR Array MLX90640 55 Degree is a sophisticated thermal sensor equipped with an MLX90640 IR Array. This device is capable of displaying dynamic thermal images and accurately detecting ambient temperatures ranging from -40 to 300 ℃.
The camera's narrow-angle design features a field of view (FOV) of 55° x 35°. It is equipped with a 32 x 24 array of thermal sensors (MLX90640), enabling it to detect the temperature of objects from a considerable distance with an accuracy of ±1.5 ℃. The camera utilizes the I2C protocol to obtain low-resolution images.
The module connects to the microcontroller unit (MCU) via the I2C interface. However, it requires an MCU with over 20000 bytes of RAM to operate the camera effectively. This thermal imaging sensor is compatible with a wide range of Arduino boards and Seeeduino boards assembled with SAMD21/SAMD51, such as the Seeeduino Lotus Cortex - M0. It also supports all series of Raspberry Pi, including the Raspberry Pi Zero.
The device operates at a voltage of 3 - 3.6 V and consumes approximately 18 mA of current. It has a field of view of 55° x 35°, a temperature measurement range of -40 - 300 °C, a resolution of ±1.5°C, a refresh rate of 0.5 - 64 Hz, and utilizes the I2C Grove interface. The I2C address is 0x33.
1x Seeedstudio Grove Thermal Imaging Camera / IR Array MLX90640 55 degree
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.