Sherline 4400 Tabletop 3.5" x 17" Manual Lathe Basic Package (inch)

Sherline Machining ToolsSKU: RB-She-11
Manufacturer #: 4400A

Price  :
Sale price $1,036.82

Shipping calculated at checkout

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Manual tabletop lathe (inch)
  • Standard parts 3.5" diameter x 17" (upgrades available)
  • Create custom turned parts
  • Many additional parts included to get started
  • Available in metric or imperial

The Sherline 4400 Series Tabletop 3.5" x 17" Manual Lathe Basic Package (inch) has 17″ between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed.

Sherline 4400 Tabletop 3.5" x 17" Manual Lathe Basic Package (inch)

Many machinists find that the extra space between centers comes in handy when working with a part held in a chuck and a larger tailstock chuck with a long drill bit in place. The combination of chucks, part and drill can eat up a lot of the available center-to-center distance, and a little extra capacity is often appreciated. This lathe offers the same diameter turning capacities as the shorter lathe and same powerful motor/speed control. The differences are both the extra 9″ of center distance and the addition of extras like the adjustable zero handwheels and rocker toolpost, making this lathe a good value for the extra cost.

  • Model 4400 (4100) 3.5" x 17" lathe (with adjustable "zero" handwheels and rocker toolpost)
  • 3.1" 3-jaw self-centering chuck
  • Jacobs 3/8" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
  • Length Overall 32.5″ (826 mm)
  • Width Overall 8.00″ (267 mm)
  • Height Overall 8.00″ (216 mm)
    • Swing Over Bed 3.50″ (90 mm)
    • Swing Over Carriage 1.75″ (45 mm)
    • Distance Between Centers 17.00″ (430 mm)
    • Hole Through Spindle .405″ (10 mm)
    • Spindle Nose Thread 3/4″-16 T.P.I.
    • Spindle Nose Taper #1 Morse
    • Spindle Runout of Morse Taper .0005″ or less
    • Travel of Crosslide 4.25″ (110 mm)
    • Tailstock Spindle Taper #0 Morse
    • Protractor Graduations 0° to 45° by 5°
    • Handwheel Graduations .001″ (.01 mm)
    • Weight 31 lb. (14.1 kg)
    • Motor 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.
    • Spindle Speed Range 70-2800 RPM continuously variable by electronic speed control

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    k
    kevin
    Nice lathe

    Nice looking and well built, have not used it yet so difficult to say much at the moment.

    Estimate shipping

    You may also like