ELECFreaksSKU:RB-Elf-78
Número de fabricante:
EF02006
2 reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Protector de teclas LCD de 16x2 (5V)
Compatible con Arduino UNO
Puede lograr seis funciones clave y una función de codificador giratorio
3 interfaces IO digital y 5 IO analógicas
El Escudo LCD de 16x2 Compatible con Arduino es una placa de expansión LCD con una pantalla LCD 1602, una llave de cinco vías y un codificador giratorio. Es totalmente compatible con la placa Arduino UNO. Puede lograr la función de visualización deseada con tan solo conectarla a la placa Arduino UNO, y luego programando el código correspondiente. Además, hay una tecla de cinco vías y un codificador giratorio, y (D13-D11) IO digital, (A0-A5) E / S analógico que contiene SPI, interfaz I2C, por lo que puede lograr la función clave en la pantalla LCD1602 y la función del codificador, y también puede construir bloques electrónicos y muchos otros módulos con este escudo de tecla LCD, por lo tanto, puede mostrar los resultados que necesita en la pantalla LCD.
Uses the common liquid crystal library for easy control. I like the combination of rotary encoder and directional joystick. Can't complain too much at this price, but there is room for improvement: * Lower edge of LCD board lacks mechanical support (added dabs of hot glue) * Joystick contacts a little on the "insensitive" side, i.e. sometimes require very firm shove to register * "B" input of encoder unnecessarily hogs the second interrupt pin ("A" input uses the first interrupt, for good reason), forcing be to cut a trace and solder on a jumper to another pin for my application * No mounting holes nor sufficient open PCB real estate to bond brackets/tabs, on a board that will be subject to direct force by user
Estimar envío
Politica de Reembolso
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.