SeeedStudioSKU:RB-See-346
Número de fabricante:
101020073
4 reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Electroimán fácil de usar con forma de Grove
1kg de succión máxima
Voltaje de operación: DC 5V
Corriente de operación: 400 mA
El Electroimán Grove es un tipo de imán en el que el campo magnético es producido por la corriente eléctrica. El Electroimán Grove puede contener 1 kg de peso. Es fácil de usar, para aprender principios electromagnéticos.
Works well - the board provides the necessary transistor, protection diode and resistors so no additional components are required. Note that you don't need a GrovePi kit or anything to make this work, just connect it to a 5V supply, ground and logic input as indicated. Works fine with a 3.3V logic signal (e.g. from a Raspberry Pi).
J
Jonathan
Works well, but not strong
A nice module, but only strong when directly contacting ferrous material. I tried putting a 0.2mm ABS cover over it and it effectively couldn't hold more than a paperclip.
M
Matt
Works as expected
Fast delivery and works great
A
Adrien
Correct product
Works great, heats a little. I test it with a 0,5kg cylinder. I can pull it, but not lift it.
Estimar envío
Politica de Reembolso
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.