SunfounderSKU:RB-Suf-05
Número de fabricante:
TS0011
6 reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
Tarjeta de interfaz de relé de 5V y 4 canales. Cada uno necesita una corriente de controlador de 15-20 mA
Equipado con relé de alta corriente, AC250V 10 A; DC30V 10 A
Interfaz estándar que se puede controlar directamente con el microcontrolador (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, lógica TTL)
LED de indicación para el estado de salida del relé
El Módulo de Shield de Relé 5V 4 Canales es una placa de interfaz. Se usa para controlar varios electrodomésticos y otros equipos de gran corriente.
I bought one of these for use with an Arduino Uno, to switch various model railroad-related loads. So far so good!
J
Jacques
Good, JVCC required option
I use this relay board because, the power required to activate relays is supplied by external power supply. I want to minimise the current load on the raspberry. I needed DPDT relays so i used two in parallele Very fast delivry
A
Alanjai
Impressed
Excellant quality product with creepage slots and opto-isolated inputs. Far better tahn the cheepies direct ordered. RobotShop is #1. AND when they say you will have it in 3 days--that's when you get it! Thanx RobotShop!
R
Robin
Excellent product
Being in engineering I was impressed that it has the high-voltage isolation grooves cut into the pcb and not just the isolation in the front-end. This is the proper way to do it on the power side of relays to prevent AC creep. (I have not tested their isolation characteristics though)
M
MikeL
Excellent product
This is exactly what I wanted. Simple low voltage control for 4 standard 110V outlets (of course light duty use only). Direct control by parallel port data pins on old PC.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.