Placa de Expansión de Motor Compatible Arduino Rover DFRobotShop (2A)
Ahorre $0.00
DFRobotSKU:RB-Dfr-151
Número de fabricante:
DRI0017
4 reviews
Comparta este producto
Pagos y Seguridad
Su Información de Pago se procesa de forma segura. No almacenamos los datos de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Descripción
• Controlador de motor de 2 vías 7-12V • Admite control de velocidad PWM • Utiliza las patillas 10, 11, 12 y 13 y tiene dos entradas de codificador de tres patillas • Compatible con DFRobotShop Rover
La Placa de Expansión de Motor Compatible Arduino Rover DFRobotShop (2A) utiliza un chip L298P que permite controlar dos motores de 7-12 V CC con una corriente máxima de 2A.
Nota: Esta placa está diseñada para ser usada con DFRobotShop Rover. Seis patillas analógicos están salidos.
I used with UNO and not the Rover and it is a strong robust motor controller. Love those extra male signal pins and the male 5v and gnd pins. Very handy and I did not need a protoshield or similar to make connections. I had a wiring short on my initial build and tried to ran the motors for several minutes several times drawing 2 amps and no damage to the motor controller, Nice.
A
Aaron
user friendly with a cost
This shield works great and is simple to set up. The only drawback is that it dedicates certain pwm pins to the motor output, tying up one timer on your microcontroller...this resulted in some timer conflicts with other devices since the timer the shield uses can't be redefined. It's not something that's a big issue unless you are integrating a lot of peripheral devices.
D
Daniel
Great motor shield
Easy to use with arduino.
Estimar envío
Politica de Reembolso
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.