Description
- 1x Actuonix P8-ST Micro Stepper Actuator 100mm - 165:1
- 2x Mounting bracket
- 1x M3 mounting hardware
- Stroke: 100 mm
- Closed Length (hole to hole): 135 mm
- Maximum Side Load: Approximately 0.10 times the Maximum Force
- Gear Ratio: 165:1
- Full Step Size: Approximately 0.0018mm
- Backdrive Force: Greater than 100N (with power applied)
- Temperature Rise: Maximum 80°C
- Input Voltage: 0.4-2 VDC
- Maximum Current (per phase): 256mA
- Operating Temperature Range: -10°C to +40°C
- Audible Noise: Less than 40 dB at 45cm on low noise settings
- Ingress Protection Rating: IP-54
- Mechanical Backlash: Less than 0.5mm
- Inductance (per phase): 4.5mH at 1kHz
- Resistance (per phase): 15 ohms
- Maximum Duty Cycle: 100%
- Maximum Static Load: 200N
- Weight: 32 g
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.