Description
- 1x Actuonix P8-ST Micro Stepper Actuator 75Mm Stroke 49:1 Gearing
- 2x Mounting bracket
- 1x M3 mounting hardware
- 1x Cable (approximately 300mm) with actuator mating connector and bared leads
- Stroke Option: 75mm
- Closed Length (hole to hole): 110mm
- Maximum Side Load: Approximately 10% of Maximum Force
- Gear Ratio: 49:1
- Full Step Size: Approximately 0.006mm
- Backdrive Force: 9N without power, greater than 30N with power
- Temperature Rise: Maximum 80°C
- Input Voltage: 0-4.2 VDC
- Maximum Current (per phase): 256mA
- Operating Temperature Range: -10°C to +40°C
- Audible Noise: Less than 40 dB at 45cm on low noise settings
- Ingress Protection Rating: IP-54
- Mechanical Backlash: Less than 0.5mm
- Inductance (per phase): 4.5mH at 1kHz
- Resistance (per phase): 150 ohms
- Maximum Duty Cycle: 100%
- Maximum Static Load: 200N
- Weight: 28 g
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.