Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Ai-Thinker NodeMCU-Ra-08H-KIT LoRaWAN Development Board ASR6601CB CH340C
Offers a LoRaWAN Development Board
Interface Type: standard micro USB + 2.54mm pitch pin header
Embedded memory, 128 KB Flash, 16 KB SRAM
Support frequency: 803 MHz - 930 MHz
Working voltage: 5 V
The Ai-Thinker NodeMCU-Ra-08H-KIT LoRaWAN Development Board ASR6601CB CH340C is equipped with a LoRa module and leads out the serial port and peripheral pins, which can be connected to the serial port with the factory firmware. The assistant can easily send and receive LoRaWAN control by sending commands.
The chip ASR6601 on the development board is a general-purpose LPWAN wireless communication SoC that integrates an RF transceiver, a modem, and a 32-bit RISCMCU. TheMCU adopts an ARM core, and the operating frequency can reach 48MHz.
The module supports LoRa modulation and traditional (G)FSK modulation under the LPWANuse case - at the same time, the transmitter also supports BPSK modulation and (G)MSK modulation, and the receiver supports (G)MSK modulation.
The Ra-08H module on the development board provides ultra-long range and ultra-low power communication for LPWAN applications, which can be widely used in smart meters, supply chain and logistics, home building automation, security systems, remote irrigation systems, and other scenarios.
1x Ai-Thinker NodeMCU-Ra-08H-KIT LoRaWAN Development Board ASR6601CB CH340C
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.