Description
- 2x 12.3MP 477P Color Camera Module mounted with CS lens
- 1x Arducam Camarray Stereo Camera HAT
- 2x 150 mm / 6 inch 22pin to 22pin Camera Cables
- 1x 80 mm / 3.15 inch 22pin to 22pin Camera Cable for Pi Zero
- 1x 73 mm / 2.87 inch 15pin to 22pin Camera Cable
- 4x M2.5*10 mm Nylon Hex Standoffs
- 4x M2.5 Nylon Nuts
- 4x M2.5*6 mm Nylon Screws
Size
- HAT: 65 x 56 mm
- Board: 38 x 38 mm
- Lens: Φ30 x 31 mm
- Hole Pitch: Compatible with 29 mm, 30 mm, 34 mm
Camarray Stereo Camera HAT
- Support Raspberry Pi 3B/3B+/4B, Pi HAT board style
- Two MIPI camera inputs and one MIPI camera output
- Support 1/2 lane MIPI cameras input up-to 1Gbps/lane
- Support 2 lane MIPI output up-to 1Gbps/lane
- Support RAW8/RAW10/RAW12 output format, the output format automatically changes with the input format
- Support Raspistill (preview) and Raspivid (processing) commands for 5MP/8MP/12.3MP pi cameras with half-resolution combine
- Support Arducam Pi cameras up to 16MP with proprietary camera driver with full resolution combined
- Support camera side-by-side combine, channel 0 and channel 1 software switching on the fly
Camera
- Sensor: 477P
- Optical Format: 1/2.3" (diagonal 7.857 mm)
- Resolution: 4056 (H) x 3040 (V) 12.3 MP
- Pixel Size: 1.55 um x 1.55 um
- IR Sensitivity: Visible light
- Interface: 4-lane MIPI CSI-2
- Default Lens Mount: CS-Mount
- Video Modes: 12-bit RAW, 30 fps at 2028 x 1522 with the Official driver; 8-bit RAW, 6 fps at 4056*2 x 3040 with Arducam driver
Lens
- Format: 1/2.3 inch
- Focal Length: 6 mm
- Aperture (F): Max. F1.2
- Field of View (FOV): 65° (H)
- Mount: CS-Mount
- Back Focal Length: 7.53 mm
- MOD: 0.2 m
- Weight: 53 g
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
