Description
- 2x 1MP OV9281 global shutter camera module with low distortion M12 len
- 1x Arducam Camarray stereo camera HAT
- 2x 150 mm / 6 inch 22-Pin to 22-Pin camera cable
- 1x 300 mm / 12 inch 15-Pin to 22-Pin camera cable
- 1x 73 mm / 2.87 inch 15-Pin to 22-Pin camera cable
- 4x M2.5*10 mm Nylon Hex Standoff
- 4x M2.5 Nylon Nut
- 4x M2.5*6 mm Nylon Screw
Size
- HAT: 65 x 56 mm
- Active Array: 1280 x 800
- Board: 40 x 40 mm
- Lense: 14 x 15.6 mm
Camarray Stereo Camera HAT
- Support Raspberry Pi 3B/3B+/4B and Jetson Nano/NX
- Two MIPI camera inputs and one MIPI camera output
- Support 1/2 lane MIPI cameras input up-to 1Gbps/lane
- Support 2 lane MIPI output up-to 1Gbps/lane
- Support RAW8/RAW10/RAW12 output format, the output format automatically changes with the input format
- Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support Arducam cameras up to 16MP with proprietary camera driver with full resolution combine
- Support camera side-by-side combine, channel 0 and channel 1 software switching on the fly
Camera
- Sensor: Monochrome global shutter OV9281
- Pixel Size: 3 μm x 3 μm
- Optical Size: 1/4 inch
- Focusing Range: 30 mm ~ infinite
- IR Sensitive: No IR filter, sensitive to IR
- Output interface: 2-lane MIPI serial output
- Video Modes: 8-bit RAW, 90fps at 1280*2 x 800 with Arducam driver on Jetson Nano/Xavier NX; 60fps at 1280*2 x 800 with Arducam driver on Rpi
Lens
- Optical Format: 1/2.7 inch
- Distortion: <1%
- Effective Focal Length: 2.8 mm
- FOV on 1/4 inch RPi Camera: 70° (H)
- F/NO: 2.8
- Mount: M12
- Weight: 4 g
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.


