Description
- 1x Arducam ToF Camera Module
- 1x 15-15pin FPC Cable (15cm)
- 1x 15-22pin FPC Cable (15cm)
- 1x 2-pin DuPont Cable

- Board: 38 x 38 mm
- Image: 1/6 inch
- Number of Effective Pixels: 240 x 180
- Max. Frame Rate (Sensor): 120fps
- Max. Depth Frame Rate (Raspberry Pi): 30fps, 4-phase
- Max. Depth Frame Rate (Nvidia Jetson**): 30fps, 4-phase
- Raspberry Pi OS Bullseye (32-bit/64-bit): 01/28/22 or later releases
- TDP: 3.5 W
- Power supply for Pi should be at least 5V/4A
- Supported Platforms: Pi 2/3/CM3/4B/Zero W/Zero 2 W/CM4/Nvidia Jetson Board
- Modulation Frequency: 75MHz/37.5MHz
- Viewing Angle: 70° Diagonal
- Measurement Distance:
- Far Mode: 4m
- Near Mode: 2m
- Light Source: 940nm VCSEL illuminator
- Interface: MIPI (2-Lane)
- Output Formats: 4-phase RAW Frame, Depth Frame, Grayscale Amplitude Frame
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.