Description
- 1x Dragino TrackerD LoRaWAN Tracker (US915)
- 1x USB recharge & program cable
- Device Size: 10 x 8.5 x 4 cm
- LoRaWAN 1.0.3 Class A
- ESP32 PICO D4
- SX1276/78 wireless chip
- Compatible with Arduino IDE
- Open-source hardware/software
- Regular/real-time GPS, BLE, and WiFi tracking
- Built-in 3-axis accelerometer (LIS3DH)
- Humidity/temperature sensor: GXCAS Technology GXHT3X
- Motion sensing capability
- Power monitoring
- Charging circuit via USB port
- 1000mA Li-ion battery power
- Tri-color LED, alarm button
- Data logging
- Bluetooth V4.2 BR/EDR and Bluetooth LE
- WiFi: 802.11 b/g/n (802.11n up to 150 Mbps)
- Integrated SPI flash: 4 MB
- RAM: 448 KB
- EEPROM: 520 KB
- Clock speed: 32 MHz
- Supply voltage: 5V via USB port or internal Li-ion battery
- Operating temperature: -40 to 60°C
- Frequency range, 168 dB maximum link budget
- Band 1 (HF): 862 to 1020 MHz
- +20 dBm - 100 mW constant RF output vs. +14 dBm high-efficiency PA
- Programmable bit rate up to 300 kbps
- High sensitivity: down to -148 dBm
- Bullet-proof front end: IIP3 = -12.5 dBm
- Excellent blocking immunity
- Low RX current of 10.3 mA, 200 nA register retention
- Fully integrated synthesizer with a resolution of 61 Hz
- FSK, GFSK, MSK, GMSK, LoRaTM, and OOK modulation
- Built-in bit synchronizer for clock recovery
- Preamble detection
- 127 dB dynamic range RSSI
- Automatic RF sense and CAD with ultra-fast AFC
- Packet engine up to 256 bytes with CRC
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.