Description
- 1x Elecrow Nanoboypico V3-02-JR board
- 2x 1x14 male header
- 2x 1x14 female header
- 1x 2-pin JST connector, 2mm pitch
- Board: 1.4 x 0.708 inch / 35.56 x 17.99 mm
- Controller: ESP32-PICO-V3-02
- Deep sleep current: 8 uA
- Internal: PSRAM
- GPIO number: 21
- Reversing current blocking diode: D2, BAT-20J, rated at 1A
- Usable LDO output current: SOT23-5, 600 mA
- Onboard user LED: Yes, GPIO13
- On board user button: Yes, GPIO38
- QWIIC/STEM interface: Yes
- Antenna: Whip Ant. and u.FL Ant.
- Charge status LED: No flickering
- Battery connector location: On the top of the PCB
- RESET pushbutton: Larger, easier to press
- Battery level monitoring resistor divider: Is switched off in deep sleep mode
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.