Description
- 1x Elecrow Raspberry Pi Pico Starter Kit w/ 25 Lessons
- 1x Raspberry Pi Pico with pin headers
- 1x Active piezoelectric buzzer
- 1x LCD1602 RGB Module
- 1x Solderless breadboard
- 1x Jumper Wire Set (65pcs)
- 1x 8-Bit WS2812 RGB LED
- 3x Push-button switch
- 15x Colorful LED: 5x Red, 5x Yellow, 5x Green
- 1x USB A/microB Cable (1.5m / 5 ft)
- 1x 10 kΩ potentiometer
- 10x Dual Male Jumper Wire
- 10x Male-Female Jumper Wire
- 10x 330 Ω resistor
- 2x HC-SR501 PIR sensor
- Dimensions: 21 x 51 mm
- RP2040 microcontroller chip designed by Raspberry Pi in the UK
- Dual-core Arm Cortex-M0+ processor with a flexible clock running up to 133 MHz
- 264KB on-chip SRAM
- 2MB on-board QSPI Flash
- 26 multifunction GPIO pins, including 3 analog inputs
- 2× UART, 2× SPI controllers, 2× I2C controllers, 16× PWM channels
- 1× USB 1 controller and PHY, with host and device support
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
- Supported input power: 1.8–5.5V DC
- Operating temperature: -20°C to +85°C
- Castellated module allows soldering directly to carrier boards
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.