Description
- 1x Elecrow ThinkNode M2 LoRa Meshtastic Signal Transceiver Powered by ESP32-S3 w/ 1.3” OLED Display w/ Case
- 1x USB-A to Type-C Cable
- 1x User Manual

- Main Processor: ESP32-S3 Module
- CPU/SoC: Xtensa 32-bit LX7 dual-core processor, up to 240MHz
- System Memory: 512KB SRAM, 8M PSRAM
- Storage: 4M Flash, 384KB ROM
- Firmware: Meshtastic firmware, LoRa mode
- Display: 1.3-inch OLED, 128x64 resolution, SSH1106 driver chip
- Wireless Communication: WiFi 802.11a/b/g/n, 2.4GHz; Bluetooth Low Energy and Bluetooth 5.0; LoRa SX1262 Transceiver, US 915MHz / EU 868MHz
- Interface: Type-C, IPEX antenna connector, battery connector
- Function: LCD display, USB 2.0, PMU power management, USB to UART, buzzer, buck circuit
- Button: Power, Function, Reset, BOOT
- LED Indicator: Power, charging
- Power Input: 5V/1A, USB or lithium battery
- Power Consumption: Maximum 217mA, Low 136mA (screen-off)
- Operating Temperature: -10 to 50°C
- Storage Temperature: -20 to 60°C
- Relative Humidity: 10%-95% at 40°C (non-condensing)
- Shell: ABS Plastic
- Net Weight: 50g (with case)
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.