Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Force: 150lbs
Stroke: 2"
12vdc nominal voltage
3amp current draw at full load
Built in limit switches, not movable
Speed at no load: 10 mm/sec (0.4"/sec)
Metal gear ratio: 20:1
IP54 Rating (splash and dust resistant)
2-wire harness, reverse polarity to change direction
The Firgelli Automations 2" Stroke 150lb Force Linear Actuator is ideally suited to applications that require quiet and smooth linear operation. They come with built in limit switches (not movable), Aluminum case, 2 clevises, one on each end.
Been using these for years, high force at lower amperage than similar linear actuators. The extendable end of the rod is made of two fused parts (an outer tube with an inner core) which makes modification difficult but when being used just with the standard rod mount works perfectly.
J
John Paul
Works alright
One thing I should note is that the stroke length is 1-7/8" not 2. So prepare your mechanisms accordingly. I've used these often and this is common to every one..
J
John Paul
Good value for the output
Works well with AA NiMH rechargeable battery packs. Maximum current from good NiMH batteries is about 4 amps and this actuator draws up to 3 amps.
J
John Paul
Adequate quality
Shaft has a little play in the mechanism, not suitable for side loads unless externally supported. Weight measured on a digital scale is 0.811 kg Contrary to the dimensions present here, the shaft diameter is actually 0.784 inches. Overall the actuator functions well when you compensate for the dimensional discrepancies. I've been using these for years.
J
John Paul
Adjustable shaft
The length of the shaft can be slightly adjusted by rotating. Probably adjust the stroke by about 1/8 inch. Which is nice if you want to fine tune the beginning or end position in your mechanism.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.