Description
- 1x GPS Receiver for Arduino (Model)
- 1x Enclosure
- 1x Cable
- Module: 28 x 28 x 8.6 mm (1.10 x 1.10 x 0.34 inch)
- Enclosure: 37 x 48 x 16 mm (1.46 x 1.89 x 0.63 inch)
- UBX-G7020-KT solution
- 1 Hz (default) ~ 10 Hz output
- 9600 bps (default) [support: 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600] TTL serial interface
- 5 V @ 30 mA (support 3.3 ~ 5 V)
- 56-Channel receiver
- Extremely high sensitivity -161 dBm
- Accuracy 2.5 m (Autonomous) / <2 m [SBAS]
- Operating temperature: -40 to 85 °C
- Hot Start: 1 s
- Warm Start: 28 s
- Cold Start: 29 s
- LED indicator
Pin Definition:
- White: PPS
- Red: VCC
- Blue: TXD
- Green: RXD
- Black: GND
- Yellow: EN
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.