The Gravity Analog Sound Level Meter (also known as the decibel meter, noise meter) is a basic noise measurement instrument. This sound level meter is compatible with Arduino. It can accurately measure the sound level of the surrounding environment. This product uses an instrument circuit and a low noise microphone. It supports a wide input voltage of 3.3~5.0V and a voltage output of 0.6~2.6V.
The decibel value is linear with the output voltage, which leads to a simple conversion, without complex algorithm. Sound level meter is widely used in environmental noise detection, such as highway noise monitoring station, room noise monitoring and so on.
The widely available much simpler boards containing just the small electret mics used in this device, with an amplifier, are good for little more than listening for a loud noise against a quieter background. This device gives a reasonable approximation to sound measured in decibels and it's trivially easy to use because of its analog voltage output that's linearly related to sound in units of dBA. If you really want to monitor sound levels with Arduinos, this is the way to do it.
Estimate shipping
Refund Policy
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.