Description
- 1x Bluno (DFR0267)
- 1x Gravity: Analog pH Sensor / Meter Kit For Arduino (SEN0161-V2)
- 1x Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino (DFR0300)
- 1x Gravity: IO Expansion Shield for Arduino V7.1 (DFR0265)
- 1x Gravity: I2C SD2405 RTC Module (DFR0469)
- 1x MicroSD card module for Arduino (DFR0229)
- 1x Gravity: Analog Signal Isolator (DFR0504)
- 1x SD/MicroSD Memory Card (16GB Class10 SDHC with Adapter) (FIT0394)
- 2x Analog sensor cable
- 1x Digital sensor cable

- Bluno Microcontroller: 60 x 53 mm / 2.36 x 2.08 inch
- pH sensor: 43 x 32 mm / 1.69 x 1.26 inch
- EC sensor: 45 x 32 mm / 1.77 x 1.26 inch
- pH and EC values are automatically recorded
- Features Micro-SD card for local storage
- Designed to be extensible
- Offers plug-and-play functionality
- Includes built-in Bluetooth
Bluno Microcontroller Specifications:
- Equipped with an on-board BLE chip: TI CC2540
- Allows wireless programming via BLE
- Supports AT command for BLE configuration
- Enables transparent communication through Serial
- BLE firmware can be easily upgraded
- Power options include USB or external 7V~12V DC
- Utilizes the Atmega328p microcontroller
- Features the Arduino Uno bootloader
- Compatible with Arduino Uno pin mapping
pH Sensor Specifications:
- Powered by 5.00V
- Measures pH within a range of 0 to 14
- Offers an accuracy of ± 0.1pH at 25 °C
- Responds in less than or equal to 1 minute
- Includes a pH sensor with BNC connector
- Features a pH2.0 interface with a 3-foot patch
- Comes with a gain adjustment potentiometer
- Has a power indicator LED
EC Sensor Specifications:
- Operates at a voltage of +5.00 V
- Measures conductivity within a range of 1ms/cm to 20ms/cm
- Functions optimally between temperatures of 5 - 40 °C
- Provides an accuracy of ±10% F.S with Arduino 10 bits ADC
- Includes a PH2.0 interface with a 3-pin SMD
- Conductivity electrode has a constant K = 1 and a BNC connector
- Electrode cable length is approximately 60cm
- Features a power indicator and an analog signal isolator
- Response time typically 4 seconds
- Analog error at both ends is approximately ± 20mV
- Interface type is PH2.0-3P
- No load current is 75mA
- Non-isolated terminal compatible with Arduino
- Isolated terminal provided for the sensor side
- Analog output ranges from 0 to 5.0V
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
