Description
- 1x Defender 25 BLITZ F7 AIO
- 1x Capacitor 470uF/35V (Onboard)
- 1x XT30U Male 18AWG cable 70mm
- 1x 1.0-7P cable 50mm-28mm
- 1x 1.0-7P cable 50mm
- 4x M2 silicon grommets
- 32.5 x 32.5 mm
- Pass-through DJI O3 and Caddx Vista/Polar Connector
- MCU: STM32F722
- Gyro: ICM42688
- Blackbox: 32MB Onboard Flash
- Gyro: DPS310
- BEC output: 5V 2.5A
- WS2812 LED Strip: Yes
- Buzzer: Yes
- Barometer: DPS310
- Connector: SH1.0 to Type-C adapter
- FC Firmware: IFLIGHT_BLITZ_F722_X1
- Input voltage: 2-4S, supports LIHV battery
- Smartaudio / IRC Tramp VTX protocol supported
- ESC MCU: STM32G071
- Driver: FD6288
- Output current: 20A, peak value 30A (10 seconds)
- ESC firmware: IFLIGHT_BLITZ_G071_01
- Current sensor: ratio 200 (1/10mV/A)
- ESC Telemetry: Yes (PCB routed, set UART6 for telemetry)
- Bidirectional DShot: Yes
- Supports DShot150/300/600/MultiShot/OneShot etc
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.