Description

- 1x BLITZ H7 Pro Flight Controller
- 8x BLITZ E80 Single ESC with CNC Aluminum Cover
- 8x 50V 1000UF Capacitor
- 8x Power Cables & ESC Signal Wires
- 2x BLITZ Pro PDB
- 1x Screws Pack
- 1x USB Adapter Board
- 42 x 42 x 11.3 mm (L x W x H)
- MCU: STM32H743
- Gyro: ICM42688
- Barometer: DPS310
- OSD: AT7456E
- Input Voltage: 14.8V-50.4V (4S-12S LIPO)
- Blackbox: SD Card
- UARTs: 7
- Supports Smartaudio / IRC Tramp VTX protocol
- LED Controller: Yes
- Beeper Pad: Yes
- BEC: 5V 3A, 12V 2.5A
- BF Firmware Target: IFLIGHT_BLITZ_H7_PRO (BF4.4.2)
- INAV Firmware: IFLIGHT_BLITZ_H7_PRO
- Ardupilot Firmware: BlitzH743Pro
- ESC Input: 2-8S (max 8S)
- ESC Capacity: 80A, 8 layers, 4OZ copper PCB
- ESC Capacitors: 11 pieces TDK MLCC, total 420UF Low ESR
- ESC MOSFET: Top grade NTMFS5C430NL
- ESC LED: 1x 3528 LED for power-on display
- ESC Design: Rational layout with large soldering pad, countersinks, and semicircle orifices
- Weight: 20 g
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.