Description
"[Standard Accessories]
- 4pin Molex to Molex 200mm wire harness 1pc
- 5 Pin Molex 200mm Expansion I/O cable 1pc
- Rear Hinge / Hinge base / Hinge shaft 1pc
- M3 Nuts 3pcs
- M2.5x6 screws 3pcs
- Socket set screw 1pc
- Rod-end tip(eye bolt) 1pc
"
"- Dimension : 57.5(L)x23(W)x40.6(H)mm
(excluding rod-end tip and rear hinge)
- Weight : 65.5g"
"- Microcontroller: 32bit ARM Core. 4096 Resolution A/D converter
- Position Sensor: 10kΩ linear potentiometer
- Motor : Coreless DC
- Stroke: 27mm (Extendable to 30mm)
- Positional Accuracy: 0.03mm (30um) - Unidirectional
- Current Accuracy : ±15% at Over 50mA
- Input Voltage: 12V
- Rated Load : 20N
- Max applicable load : 40N (at 20% duty rate)
- Stall force at Current (1.6A / 800mA / 200mA) : 90N / 58N / 23N
- Speed : 117mm/sec (at no load)
- Max Duty rate : 50%
- Gear : Engineering plastic gears
- Gear Ratio : 10:1
- Rod : Metal Alloy Rod
- Mechanical Backlash: 0.03mm (30um)
- Current consumption : 400mA(rated), 30mA(Idle), 1.6A(Stall Max), 0.8A(Stall default)
- Audible noise : 50db at 1m
- Data Communication & Protocol : RS-485 / MODBUS RTU Protocol
- Expansion I/O : 4 Ports (Function : Switch, JOG, Action Enable, Force Off, PAUSE, STOP, RESTART, Alarm OUT)
- LED Indication : 2 Error Indications (Input voltage, Overload)
- Parameter Setting: Programmable (more than 50 Operating and Setting Parameters)
- Ingress Protection: IP-54 (Dust & Water Tight)
- Operating Temp: -10~60C
- Wire harness : Molex to Molex Type (Molex 0510650400, 4pins) / 200mm length, 0.08×60(22AWG) / I/O Port Wire harness : Molex 510210500, 5pins / 200mm length, 0.16 x 7 (26AWG)"
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.