Payments and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
[Standard Accessories]
- Molex 200mm wire harness 1pc
- Rear Hinge / Hinge base / Hinge shaft 1pc
- M3 Nuts 3pcs
- M2.5x5 screws 3pcs
- Socket set screw 1pc
- Socket head M3x8 mounting bolts 3pcs
86.9 mm (L)
36 mm (W)
18 mm (H) (excluding rod end tip and rear hinge)
Weight: 96 g
- Microcontroller: 32bit ARM Core. 4096 Resolution (A/D converter)
- Position Sensor: 10kΩ linear potentiometer
- Motor : Coreless DC
- Stroke: 40mm
- Positional Accuracy: 0.03mm (30um) - Unidirectional
- Current Accuracy : ±15% at Over 50mA
- Input Voltage: 12V
- Rated Load : 10N
- Max applicable load : 20N (at 20% duty rate)
- Stall force at Current (1.6A / 800mA / 100mA) : 60N / 40N / 10N
- Speed : 110mm/sec (at no load)
- Max Duty rate : 50%
- Gear : Engineering plastic gears
- Gear Ratio : 10:1
- Rod : Metal Alloy Rod
- Mechanical Backlash: 0.03mm (30um)
- Current consumption : 380mA(rated), 20mA(Idle), 1.6A(Stall Max), 0.8A(Stall default)
- Audible noise : 50db at 1m
- Data Communication & Protocol : TTL/PWM / IR Robot Open protocol or MODBUS RTU Protocol
- PWM pulse : 900μs(Retracted)-1500μs(Center)-2100μs (Extended)
- LED Indication : 2 Error Indications (Input voltage, Overload)
- Parameter Setting: Programmable (more than 50 Operating and Setting Parameters)
- Ingress Protection: IP-54 (Dust & Water Tight)
- Operating Temp: -10~60C
- Wire harness : Molex to Molex Type(Molex 50-37-5033, 3pins) / 200mm length, 0.08×60(22AWG)