Description
- 1x MakePython ESP32 WiFi Color LCD Display WROOM
WiFi
- Protocols: 802.11 b/g/n (802.11 n up to 150 Mbps) | A-MPDU and A-MSDU aggregation and 0.4 us guard interval support
- Frequency range: 2.4 GHz - 2.5 GHz
Bluetooth
- Protocols: Bluetooth v4.2 BR/EDR and BLE specification
- Radio: NZIF receiver with -97 dBm sensitivity | Class-1, class-2 and class-3 transmitter | AFH
- Audio: CVSD and SBC
Hardware
- CPU: Two low-power Xtensa 32-bit LX6, ESP32-D0WDQ6
- CPU clock frequency: 80 to 240 MHz
- Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC
- On-chip sensor: Hall sensor
- On-chip Internal RAM: 520 KB
- Integrated crystal: 40 MHz crystal
- Integrated SPI flash: 4 MB
- Integrated PSRAM: NO (MakePython ESP32 WROOM) | 8 MB (MakePython ESP32 WROVER)
- Power supply: 5 V, Integrated 5 V - to - 3.3 V LDO
- Operating current: Average: 80 mA
- Minimum current delivered by power supply: 500 mA
- LCD: 1.3 inches TFT ST7789 driver
- Recommended operating temperature range: -40 - +85 °C
- Moisture sensitivity level (MSL): Level 3
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
