Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Motoron M2H24v14 Dual High-Power Motor Controller Kit for Raspberry Pi
Includes unsoldered aluminum standoffs, header pins, and terminal block options
Supports motor supply voltages from 6.5 to 40 V
Capable of delivering continuous output currents of up to 14 A per motor
Features I²C interface for easy communication with Raspberry Pi
The Motoron M2H24v14 Dual High-Power Motor Controller Kit for RPi w/ Connectors is a sophisticated device designed to manage DC motors via a Raspberry Pi (Model B+ or newer) through an I²C interface. It is capable of supporting motor supply voltages ranging from 6.5 to 40 V and delivering continuous output currents of up to 14 A per motor. This particular model includes aluminum standoffs, header pins, and terminal block options, which are provided but not pre-soldered.
The M2H controllers are ingeniously designed to stack atop a Raspberry Pi, akin to a HAT (Hardware Attached on Top). This unique design allows for multiple controllers to be stacked, enabling independent control of numerous motors. Communication between the Raspberry Pi and the Motoron is facilitated through I²C, requiring only two GPIO pins, irrespective of the number of Motorons connected.
The M2H24v14 controller is capable of supporting motor supply voltages from 6.5 V to 40 V, with an absolute maximum limit not intended for use with 36 V batteries. It can deliver continuous output currents of up to 14 A per motor. The M2H24v14 is distinguishable from other M2H controllers by its smaller discrete MOSFETs and the number 100 on top of the tall silver electrolytic capacitors.
This model is a kit that includes but does not pre-solder, the following connectors: Three 2-pin 5mm screw terminal blocks and one 1x25 breakaway male header. This header can be cut or broken into smaller header strips for installation as desired. The kit also includes a set of four M2.5 standoffs (11 mm length), screws, and nuts that can be used to secure the board at the appropriate height.
Please note that the absolute maximum voltage is not intended for use with 36 V batteries.
1x Motoron M2H24v14 Dual High-Power Motor Controller Kit for RPi
1x 2x20 Stackable Female Header
3x 2-pin 5mm Screw Terminal Blocks
1x 1x25 Breakaway Male Header (can be cut or broken into smaller header strips as desired)
1x Set of four M2.5 Standoffs (11 mm length), Screws, and Nuts
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.