Description
- 6 x PiRacer metal kit
- 2 x EVA felt pad
- 1 x 3D-printed motor lid
- 1 x PiRacer expansion board
- 1 x RPi Camera (G)
- 1 x Acrylic piece
- 1 x Servo mount
- 2 x Metal Gearmotor
- 4 x Tire
- 2 x Coupler
- 1 x MG996R servo
- 1 x MG996R servo wheel
- 2 x Steering knuckle
- 4 x Ball bearing
- 4 x M3 plastic ball joint
- 2 x M3 pull bar
- 1 x 12.6 V battery charger + EU head
- 1 x Wireless gamepad
- 1 x 6-Pin cable
- 2 x Spanner
- 2 x Screwdriver
- 1 x Mini cross wrench sleeve
- 1 x Micro SD card reader
- 1 x Screws pack
- 1 x Track map
- Controller: Raspberry Pi 4 Model B
- OS: Raspberry Pi OS (Raspbian)
- Language: Python
- Camera: 5 MP HD resolution, 160° FOV wide-angle camera
- OLED: 0.91" 128 x 32 pixels
- Wireless: 2.4GHz / 5GHz dual-band WiFi, Bluetooth 5.0
- Teleoperation: Gamepad, webpage
- Communication: WiFi
- Protection: Over charge/discharge protection, over current protection, short circuit protection, reverse proof
- Driving Type: Ackerman steering Dual Gearmotor rear-wheel drive
- Power Supply: 12.6 V, 18650 battery x 3
- Motor: 37-520 DC gearmotor | Reduction rate 1:10 | Idle speed 740 RPM
- Servo: MG996R, 9 kg/cm torque
- Chassis: Aluminum alloy chassis
- Crashproof: Front sponge
- Program Library: DonkeyCar
- Weight: 2.719 kg
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.


