Description
- 1x Pololu High-Power Simple Motor Controller G2 24v12 PCB
- 1x 0.1-inch (2.54 mm) breakaway male header strip (40-pin, unsoldered)
- 2x 2-pin 5 mm pitch screw terminal blocks (unsoldered)
- 2.1 x 1.1 x 0.42 inches (without included hardware)
- Motor channels: 1
- Control interface: USB, non-inverted TTL serial, I²C, RC servo pulses, analog voltage
- Minimum operating voltage: 6.5 V
- Maximum operating voltage: 40 V (absolute max; 34 V recommended)
- Maximum recommended nominal battery voltage: 28 V
- Continuous output current: 12 A (no heat sink required)
- Maximum PWM frequency: 22.5 kHz (ultrasonic, eliminates audible motor noise)
- Maximum logic voltage: 3.3 V (all digital inputs are 5 V tolerant)
- Reverse voltage protection: Yes
- Hardware current limiting: Yes (software-configurable threshold)
- USB type: Micro-B, full-speed (12 Mbps)
- TTL serial baud rate: Auto-detect 1,200–500,000 bps, or fixed
- RoHS 3 compliant
- Weight: 7.5 g (without included hardware)
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.