RGB 64 I2C 24-bit Color Programmable LED Matrix Panel
Designed for Raspberry Pi (Not Included)
Onboard 8 x 8 RGB LEDs
64 Pixels, 36.5 x 36.5 mm
Brightness: 256 levels adjustable
Working voltage: DC 3.3 V
Communication method: I2C
The RGB 8x8 64 I2C 24 bit Color Programmable LED Matrix Panel is specifically designed for Raspberry Pi. This is a module with RGB LEDs on board. Arranged in an 8x8 matrix, each pixel is individually addressable.
I2C Control Interface: With the SH1.0-4P I2C control interface, it is convenient to connect to other I2C devices or other single-chip microcomputers, only one microcontroller pin is required to control all the LEDs
Full-Color Performance: You get 24 bit color for each LED. Red, Green, Blue, R/G/B each 8-bit color, 256 x 256 x 256 = 16777216 colors can be combined. The brightness of 256 levels is adjustable freely
Easy to use: DC 3.3 V working voltage, 4.7 mm pixel pitch, follow the steps in our online website and you will be able to use RGB Matrix immediately
DIY Different Effect: You can DIY any magic effects with this display module, such as scrolling messages, drawing images, fireworks effects, water lamps, interactive games.
1x RGB Matrix Shield/HAT
6x Standoff
1x Light Diffusion Filter
1x Screwdriver
10x M2.5x6 Nylon Screw
1x Online Tutorials Card
Size
65 x 55 mm / 6.5 x 5.5 cm (L x W)
Pixel pitch: 4.7 mm
Dot size: 36.5 x 36.5 mm
Working voltage: DC 3.3 V
Lamp bead: FM-N3535RGBW-SH
Drive mode: SLED 1734X LED driver
Communication method: I2C
Brightness: 256 levels adjustable
Color depth: 24 bit (R/G/B each 8 bit color, 256 x 256 x 256 = 16777216 colors can be combined)
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Refund Policy
If you are not satisfied with a product purchased from the Site, you may request a return within 30 days from the delivery date, unless the product is listed under the Return Exceptions below or is subject to specific return conditions noted on the product page.
This return policy also applies, as a minimum standard, to products sold and fulfilled by third-party vendors through the Marketplace.
Returns under this policy concern non-defective products. In the case of a confirmed manufacturing defect, remedies are handled under the Warranty terms, at the Vendor's discretion. See the Warranty section.
Return Conditions
To qualify for a refund under the 30-day return policy, all of the following conditions must be met:
A valid Return Authorization (RA) number must be obtained prior to returning the product. Returns without an RA number will be refused.
The RA number is valid for 30 days. The returned item must be received within that period.
The RA number must be included with the return.
Products must be returned in unused, unmodified condition (e.g., no scratches, alterations, missing parts, or signs of installation/use) and in their original packaging, suitable for resale.
Shipping fees are non-refundable. Return shipping costs are the responsibility of the customer, except in cases of a product confirmed defective through RobotShop's troubleshooting process or of a verified shipping error by RobotShop.
Refunds are processed within 7 days after receipt and inspection of the returned item.
A $100 cleaning fee may apply to domestic robots returned in used or unclean condition.
A 20% restocking fee may apply to large-quantity returns of items ordered specifically for the customer from the manufacturer or not part of RobotShop's standard inventory.
Return Exceptions
The following products are not eligible for return or refund under this policy:
Used, damaged, or modified products — Items that show signs of use, wear, or alteration, making them unsuitable for resale.
Consumables — Use and wear-and-tear components, altered or depleted through use (e.g., batteries, belts, brushes, gears, filament, tires, disposable bags, lubricants, greases, waxes, etc.). Not eligible for return once opened or used.
Perishables — Goods liable to deteriorate or expire rapidly. Not eligible for return.
Sealed goods (health or hygiene) — Items sealed for health-protection or hygiene reasons (e.g., masks, gloves, odor-absorbing products). Not eligible for return once unsealed.
Build-it-yourself products and items requiring customer assembly — Including robots & kits, robot parts, and other products requiring assembly or soldering. Not eligible for return once assembled, soldered, or installed.
Digital Goods, Software, and Apps — Final sale only, due to licensing restrictions.
Clearance Items — Products identified as clearance or final sale, including end-of-life or discontinued items.
Custom-made, personalized, or special-order items — Products manufactured, configured, adapted, or built to the customer's own specifications and requirements.
On-Demand Items — Standard catalogue products not stocked by RobotShop and ordered specifically to fulfill a customer request.
While the same return policy applies, these orders require a separate contact process for returns.
RobotShop Fulfilled Orders → submit a support ticket from your account under My Support Tickets.
Marketplace Vendor Orders → submit a ticket from your account under My Marketplace Tickets to contact the vendor directly.
Note: Marketplace vendor products are normally labelled with SKUs starting with RM, and identified on the product page with the mention "Sold and fulfilled by [Vendor Name]".