Description
- 1x SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032
- 1x 20-Pin Terminal Block
- 1x 2-Pin Power Female Jack to Screw Terminal Adapter
- 1x Scew Pack
- 1x Fuse
- 1x WiFi/BLE Feeder Cable (installed)
- 1x WiFi/BLE antenna
- 1x User Guide
- 259.4 x 191 x 42.2 mm
ZIP Files
- SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032 Raspberry Pi Industrial Panel PC - Schematic Design Files
- SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032 Raspberry Pi Industrial Panel PC - Structural Design File
PDF Files
- SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032 Raspberry Pi Industrial Panel PC - Datasheet
- SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032 Raspberry Pi Industrial Panel PC - Azure IoT Edge
- SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032 Raspberry Pi Industrial Panel PC - EMC Test Report
- SeeedStudio reTerminal DM - 10.1'' Industrial HMI CM4104032 Raspberry Pi Industrial Panel PC - Vibration and Shock Test
- CPU: CM4 Quad-core Cortex-A72 at 1.5GHz
- Memory: 4GB
- Storage: 32GB eMMC
- M.2 NVMe SSD Slot: 2280-M Key (optional)
- OS Support: Raspbian, SenseCraft Edge OS
- Maximum Resolution: 1280 x 800
- Maximum Colors: 16.7 million (8-bit)
- Luminance: 400 nits
- Viewing Angle: 170° horizontal/vertical
- Backlight Life: 30,000 hours
- Touch Type: 10-point capacitive
- Pencil Hardness: 7H
- Video: HDMI 2.0
- Audio: Two microphones, buzzer, 3.5mm audio jack
- Camera: CSI (optional)
- Ethernet: One 10/100/1000 Mbps
- USB: Two USB-A 2.0 host ports
- RS485: One RS485 to terminal block
- RS232: One RS232 to terminal block
- CAN: One CAN-BUS to terminal block
- Digital Input: Four DI to terminal block
- Digital Output: Four DO to terminal block
- 40-pin GPIO: Internal
- Wi-Fi: On-chip
- Bluetooth Low Energy: On-chip
- Power Input: 2-pin terminal block
- Power Range: 12 to 24V DC
- Power Consumption: 6W typical, 9W maximum
- Reboot Switch: Yes
- Ingress Protection: IP65 front panel
- Operating Temperature: -10 to 50 °C
- Storage Temperature: -20 to 70 °C
- Humidity (Operating): 10 to 95% RH
- Enclosure: Die-cast aluminum alloy
- Mounting: Panel, VESA, DIN-rail
- Vibration Resistance: 5 Grms random vibration (5 to 500Hz) during operation, IEC60068-2-64
- Shock Resistance: Operating 50 G peak (11ms duration), IEC 60068-2-27
- Certification: CE, FCC, UCKA, RoHS, TELEC, REACH
- EMC: ESD: EN61000-4-2, Level 3; EFT: EN61000-4, Level 2; Surge: EN61000-4-5, Level 2
- RTC: High accuracy RTC with a CR2032 battery
- Hardware Watchdog: 1 to 255 seconds
- Security: ATECC608A
- Heat Dissipation: Fanless
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
