Description
- 1x Sequent Microsystems 3 40A/240V Relays RS485 Daisy-Chainable HAT for Raspberry Pi
- 1x Mounting hardware: four M2.5x18mm male-female brass standoffs, four M2.5x5mm brass screws, four M2.5 brass nuts
- Connector plugs
- DIN-rail mounting brackets and screws
- Pluggable connectors for 26-16 AWG wires for 12V power and RS485
- Daisy-chainable to 32 cards via RS485 port
- On-board processor included
- Each relay can switch up to 40A and 240VAC, 30VDC
- Heavy-duty 40A/750V terminal block for output contacts
- RS485/MODBUS port with TVS protection and dual connectors
- General-purpose push-button
- LED indicators on each relay
- All mounting hardware included: stand-offs, screws, and nuts
- DIN-Rail mounting clips included
- On-board resettable fuse
- Software self-test capability
- Uses only I2C port; all GPIO pins available
- Compatible with any Raspberry Pi from ZERO to 5
- Power supply: 12V/8A pluggable connector with reverse polarity protection
- Contact configuration: SPST-NO
- Contact rating: 40A/277 VAC inductive load, 40A/VAC resistive load, 40A/30VDC
- On/off time: 20ms maximum each
- Electrical endurance: 600 cycles/hour at full load
- Mechanical endurance: 18,000 cycles/hour with no load
- Electrical life: 50,000 operations minimum at 40A 277VAC
- Mechanical life: 10,000 operations minimum with no load
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.