Description
- 1x Sequent Microsystems Sixteen Solid State Relays 2A/24V 8-Layer Stackable HAT for Raspberry Pi
- Mounting hardware
- 4x M2.5x18mm male-female brass standoff
- 4x M2.5x5mm brass screw
- 4x M2.5 brass nut
- Connector plugs
- All relays equipped with status LEDs and normally open (N.O.) contacts
- Stackable up to eight layers, supporting 128 relays
- Pluggable connectors for 26-16 AWG wires
- 5V power supply with reverse polarity protection
- Onboard hardware watchdog
- RS485 port included
- General-purpose push-button
- Eight LEDs indicating the status of groups of eight relays
- Software self-test capability
- Utilizes only the I2C port, leaving all GPIO pins available
- Compatible with any Raspberry Pi from ZERO to 5
- ECCN Code: EAR99
- Command Line interface available
- Python Library support
- Node-Red nodes included
- CODESYS Driver available
- OpenPLC module support
- Home Assistant integration
- Arduino Library support
- Power supply: 5V/8A pluggable connector with reverse polarity protection
- Onboard resettable fuse rated at 3A
- Relays with normally open (N.O.) contacts, rated at 2.0A/24 VAC/DC
- Ron resistance: typically 60mΩ
- Off-state leakage current: maximum 1μA
- Turn-on time: maximum 1.5ms
- Turn-off time: maximum 0.5ms
- Load current: maximum 2.5A
- Peak load current: 5A with a 100ms pulse
- Electrical and mechanical endurance: unlimited
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.