Description
- 1x ServoCity 2000 Series Dual Mode Servo (25-4, Super Speed)
- Weight: 58g (2.05oz)
- Gear ratio: 67:1
- Output shaft style: H25T spline
- Voltage range: 4.8V - 7.4V
- No-load speed at 4.8V: 0.055 sec/60° (180RPM)
- No-load speed at 6.0V: 0.043 sec/60° (230RPM)
- No-load speed at 7.4V: 0.035 sec/60° (290RPM)
- Stall torque at 4.8V: 55 oz-in (4.0 kg.cm)
- Stall torque at 6.0V: 65 oz-in (4.7 kg.cm)
- Stall torque at 7.4V: 75 oz-in (5.4 kg.cm)
- No-load current at 4.8V: 190mA
- No-load current at 6.0V: 200mA
- No-load current at 7.4V: 230mA
- Stall current at 4.8V: 2,000mA
- Stall current at 6.0V: 2,500mA
- Stall current at 7.4V: 3,000mA
- Maximum PWM range: 500-2500μsec
- Maximum PWM range (continuous): 1000 - 2000μsec
- Travel per μsec: 0.15°/μsec
- Maximum rotation (default mode): 300°
- Pulse amplitude: 3-5V
- Deadband width: 4μsec
- Motor type: Brushed DC
- Feedback style: 5KΩ potentiometer
- Output shaft support: Dual ball bearing
- Gear material: Steel
- Wire length: 11.81" (300mm)
- Wire gauge: 22AWG
- Connector type: 3-Pos TJC8 servo connector [MH-FC]
- Direction with increasing PWM signal: Clockwise
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
