The ServoCity Stingray-7 Servo Gearbox (8.6 rpm, 2450 Oz-in Torque, Continuous Rotation) is engineered to enhance torque and precision through a 7:1 external gear ratio, driven by the goBILDA® 5-Turn Torque Servo. This gearbox is designed to isolate the load to a steel hub-shaft supported by ball bearings, thereby safeguarding the servo from axial loads. It offers versatile mounting options with M4 threaded holes compatible with the goBILDA® system, and the hub provides additional fastening possibilities. The 8mm REX bore of the hub-shaft can accommodate an 8mm REX shaft or serve as a wire pass-through. This servo gearbox functions similarly to a standard servo but with increased range and torque, maintaining identical control signals. It is compatible with R/C receivers, Arduino, Raspberry Pi, or REV controllers, and remains FTC legal as the servo is unmodified. Available in both feedback and continuous modes, the gearbox allows for control over position or speed and direction, respectively. The mode can be switched using a 3102-0001 servo programmer, thanks to the dual-mode capability of the goBILDA® 5-Turn Torque Servo.
If you are not satisfied for whatever reason with a Product you bought on the Site, it is possible to return it for refund within 30 days from the date you received it unless otherwise indicated in the Product listing. You must first advise the Vendor associated with your order in your account to obtain a return authorization (‘’RA’’) number before returning a Product. (‘’RA’’) numbers are valid for 30 days, within which time the returned Products should be received by the Vendor. No returns will be accepted without having previously obtained an (‘’RA’’) number. The Product must then be returned in its original packaging (in perfect condition for resale) with its receipt and your (‘’RA’’) number. Reimbursement will be denied for any Products which do not conform to the above mentioned conditions.
Build-it-yourself Robot Parts are not refundable once assembled. Robots & Kits requiring assembly or soldering are also not refundable once assembled, soldered or modified in any way. All sales of robotic software and apps are final and cannot be refunded or exchanged. Returns are not accepted on special orders and clearance items except when they are found defective, in which case the Product may be repaired or replaced at the Vendor’s discretion. 20% Restocking fees may apply if you are returning a large quantity of the same Product that was ordered specifically for you from the manufacturer.
Please note that all items will be reimbursed within 7 to 14 days of receiving the Product (shipping fees excluded). You must also cover the cost of returning the Product. Shipping fees will only be refunded if the return is a result of a shipping error on our part. Cleaning fees of USD 100 may also be charged if a domestic robot is returned and has not been properly cleaned.