Shark-5 Servo Gearbox (14 rpm, 2360 Oz-in Torque, Continuous Rotation)

ServoCitySKU: RB-Sct-1635
Manufacturer #: 3216-0002-0005

Price  :
Sale price $279.99

Shipping calculated at checkout

On Demand See due date

This is an On Demand item and is not normally stocked. We will order it for you along with our next purchase from the supplier.

* Delays depend on the order frequency from each supplier and the approximate arrival date is indicated in the due date. Returns are not accepted on On Demand and Clearance Items except when they are found defective, in which case the product may be repaired or replaced at RobotShop's discretion.

Payments and Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Description

  • Shark-5 Servo Gearbox (14 rpm, 2360 Oz-in Torque, Continuous Rotation)
  • Engineered with brushless titanium geared servo
  • Provides enhanced torque with 5:1 gear ratio
  • Compatible with goBILDA system for flexible mounting
  • Supports feedback and continuous rotation modes
  • Functions in standard servo control with added power

The Shark-5 Servo Gearbox (14 rpm, 2360 Oz-in Torque, Continuous Rotation) is engineered with a Hitec HSR-M9382TH brushless, titanium geared servo, offering enhanced torque and precision through a 5:1 external gear ratio. This design reduces the range while amplifying torque and precision five times. The servo is securely mounted within the gearbox, isolating the load to a steel hub-shaft supported by ball bearings, thus safeguarding the servo from axial loads. The gearbox is compatible with the goBILDA® system, featuring M4 threaded holes on a grid pattern for versatile mounting options. The hub on the gearbox top provides additional threaded holes for fastening, and the aluminum output gear can be directly fastened using M4 hardware. The 8mm REX bore of the hub-shaft can accommodate an 8mm REX shaft or serve as a wire pass-through. This servo gearbox functions similarly to a standard servo but on a larger scale, maintaining identical control signals. It can be connected to an R/C receiver, Arduino, Raspberry Pi, or REV controller, and remains FTC legal as it is unmodified. Available in both feedback and continuous modes, the gearbox allows for control over position or speed and direction, respectively. Mode switching is possible with a DPC-11 servo programmer.

Shark-5 Servo Gearbox 14 RPM 2360 Oz-in Torque

  • 1x Shark-5 Servo Gearbox (14 rpm, 2360 Oz-in Torque, Continuous Rotation)
  • Gear ratio: 5:1
  • Voltage range: 6V - 8.4V
  • No-load speed at 6.0V: 0.85 sec/60° (11.8 RPM)
  • No-load speed at 7.4V: 0.70 sec/60° (14.3 RPM)
  • Stall torque at 6.0-7.4V: 2360 oz-in (170 kg.cm)
  • No-load current at 6.0V: 260 mA
  • No-load current at 7.4V: 270 mA
  • Stall current at 6.0-7.4V: 2700 mA
  • Motor type: Brushless DC
  • Direction with increasing PWM signal: Counterclockwise
  • Maximum PWM range: 800-2200 μsec
  • Travel per μsec: 0.36°/μsec
  • Maximum rotation: 504° (1.4 turns)
  • Pulse amplitude: 3-5V
  • Deadband width: 1 μsec
  • Wire gauge: 22 AWG
  • Intellectual property: Patented
  • Connector type: 3-position TJC8 servo connector [MH-FC]

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Estimate shipping

You may also like