Description
- 1x Sherline 6-Direction 2-Axis Machine Slide (")
- 10-32 x 1/2″ Cup Point Set Screw
- Graduated Clamping Ring
- Moveable Clamping Disk
- Saddle Nut w/ Ball
- Saddle Locking Lever
- 10-32 x 5/8″ SHCS
- 10-32 x 1″ SHCS
- 10-32 x 3/16″ Cup Point Set Screw
- 10-32 x 1/4″ Flat Point Set Screw
- 10-32 x 1/2″ SHCS
- 10-32 x 3/4″ SHCS
- Gib Lock
- Slide Screw Insert
- Saddle
- Gib, Crosslide
- Gib, Z-Axis
- Manual Column Bed
- 8″ Leadscrew
- 8-32 x 1/4″ Button Head Screw
- 1/4-20 x 1-3/4″ SHCS
- 1/4-20 x 1/2″ SHCS
- Arm Hold-Down Bolt
- Arm Hold-Down Washer
- 3/8-16 x 2″ Shouldered Bolt
- Swing Arm Side
- Flange Nut
- Swing Arm Side
- Column Adjustment Block
- Arm Spacer Block
- Arm Mount
- Index Tab
- 3/32″ x 1/2″ Dowel Pin
- Column Top
- Column Base
- 2″ Industrial Handwheel
- Thrust Collar
- Z-Axis Leadscrew
- X-Axis 8″ Crosslide
- Preload Nut
- 8-32 x 7/8″ Socket Head Cap Screw
- 5-40 x 1″ Socket Head Cap Screw
- Ball Bearing w/ Flange
- Table size: 2.75 x 8" (70 x 203.2 mm)
- Column size: 11" (279.4 mm)
- Z-axis travel: 5.38″ (137 mm)
- X-axis travel: 4.25″ (108 mm)
- Column rotation: 90° left/right
- Column pivot: 90° forward/backward
- Column swing: 90° left/right
- Column in/out travel: 5″ (140 mm)
- Hold-down provision: 2 T-slots
- Mounting provision: 2 holes 1/4-20 in the base plus slot for angle clamps
- Handwheels: 2″ laser-engraved aluminum with two pre-loaded ball bearings
- Weight capacity: Approximately 10 lbs., depending on weight location and table length
- Duty cycle: 2080 hours under heavy use before wear on anodize
- Leadscrews: Precision rolled from steel, backlash adjustable
- Dovetailed tables and saddles: Adjustable gibs to eliminate play
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.