Description
- 1x Sherline 8-Inch Tabletop Lathe with Zero Adjustable Handwheels Without Headstock or Speed Controller (Metric)
- 1x Powerful 90V DC motor with electronic speed controller
- 1x 2.75″ (70mm) x 6.0″ (152mm) crosslide
- 1x 15″ (381mm) steel bed to allow 8″ (203mm) between centers
- 1x 2.5″ (63mm) resettable, zero adjustable handwheel on the leadscrew
- 1x 2″ (51mm) resettable, zero adjustable handwheel on the crosslide feed screw
- 1x Standard 1-5/8″ (41mm) handwheel on the tailstock
- Laser-engraved aluminum handwheel collars
- Pulleys
- Drive belt
- Faceplate
- Lathe dog
- Two dead centers
- Three hexagonal keys
- Tool post
- Sharpened high-speed steel cutting tool
- Eight-foot three-wire power cord
- Instruction manual
- Length Overall: 597 mm (23.5")
- Width Overall: 267 mm (10.5")
- Height Overall: 216 mm (8.5")
- Swing over bed: 3.50″ (90 mm)
- Swing over carriage: 1.75″ (45 mm)
- Distance between centers: 8.00″ (200 mm)
- Hole through spindle: .405″ (10 mm)
- Spindle nose thread: 3/4″-16 T.P.I
- Spindle nose taper: #1 Morse
- Spindle runout of Morse taper: .0005″ or less
- Travel of crosslide: 4.25″ (110 mm)
- Tailstock spindle taper: #0 Morse
- Protractor graduations: 0° to 45° by 5°
- Handwheel graduations: .001″ (.01 mm)
- Motor: 90 volt DC with electronic speed control accepting 100VAC to 240 VAC, 50 Hz or 60 Hz
- Spindle speed range: 70-2800 RPM, continuously variable by electronic speed control
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.