Description
- 1x Sherline Dovetail-Base Headstock w/ 90-Volt DC Motor 3/4-16 #1m Taper
- 1x Preload Nut
- 1x 3/4-16/#1 Morse Spindle
- 1x Bearing Dust Cover Washer
- 1x 0-32 x 5/8″ Socket Head Cap Screw
- Class 5 Headstock Bearings
- #2 x 1/4″ Self-Tapping Phillips Head Screws
- 1x 10-32 X 1/4″ Flat PT Set Screw
- 1x 10-32 x 1/2″ Socket Head Cap Screw
- 1x 2-Step V-Belt Pulley
- 1x Headstock Case, Dovetailed Base
- 1x Industrial Headstock Spacer
- 1x Saddle Nut Attachment Plate
- 1x Industrial Brass Gib

- Spindle base size: 3.50 x 3.375 inches (88.9 x 85.7 mm)
- Spindle case height: 3.625 inches (92 mm)
- Spindle centerline height above table: 2.50 inches (63.5 mm)
- Hole through spindle: 0.405 inches (10 mm)
- Spindle nose thread: 3/4-16
- Spindle nose internal taper: #1 Morse
- Bearings: Two 20 mm, class 5, lifetime lubricated ball bearings with adjustable preload
- Runout at spindle nose: 0.001″ (Most are within 0.0005″)
- End play (factory preload adjustment): 0.0002″ (0.0051 mm)
- Recommended continuous spindle speed: 4000 RPM or less
- Maximum spindle speed: 10,000 RPM
- Mounting provision: Dovetail with brass gib
- 1/2 HP 90-volt high-torque DC motor (single direction)
- 2-step “V” belt pulley (second position for more torque at low RPM)
- Fiberglass-reinforced urethane drive belt
- Variable speed electronic speed control: 70-2800 RPM
- Load compensating circuit maintains constant RPM
- Speed control accepts input from 100 VAC to 240 VAC, 50 or 60 Hz, and converts it to 90V DC output to the motor
- Eight-foot, three-wire power cord
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.