Description
- 1x Sherline Manual 10-Inch Tabletop Mill with Zero Adjustable Handwheels Package A (Metric)
- 1x ¼” Drill Chuck with key, #1 Morse arbor with drawbolt
- 1x Step block hold-down set
- 1x 5/32″ Sherline hex T-driver
- 3x Center drill set
- 1x Fly cutter with carbide bit
- 3x Mill collet set with drawbolt
- 6x 3/8″ 2-flute double-ended end mill set
- 1x 3/8″ End mill holder
- 1x Milling vise
- 1x Sherline Accessories Shop Guide
- Width Overall: 375 mm (14.75")
- Depth Overall: 298.5 mm (11.875")
- Height Overall (Max.): 527 mm (20.75")
- Table Size: 70 x 330 mm (2.75 x 13.00")
- Maximum clearance from table to spindle: 8.00″ (203 mm)
- X-Axis travel: 8.65″ (220 mm)
- Y-Axis travel: 3.00″ (76 mm)
- Z-Axis travel: 6.25″ (159 mm)
- Hole through spindle: 0.405″ (10 mm)
- Spindle nose thread: 3/4″-16 T.P.I
- Spindle nose taper: #1 Morse
- Spindle runout of Morse taper: 0.0005″ or less
- Handwheel graduations: 0.001″ (0.01 mm)
- Electronically controlled spindle speed range: 70 to 2800 RPM
- Motor: 90-volt DC with electronic speed control
- Headstock rotation: 90° left/right
- Column travel (in/out): 5″ (140 mm)
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.