Description
- 1x Sherline Square Headstock w/ Flat Base ER-16
- 1x 10-32 x 3/8″ Flat Point Set Screw
- 1x Preload Nut
- 1x Bearing Dust Cover Washer
- 1x 10-32 x 5/8″ SHCS
- Class 5 Headstock Bearings
- #2 x 1/4″ Self-Tapping Phillips Head Screws
- 1x ER-16 Spindle
- 1x ER-16 collet nut
- 1x Industrial Headstock Case w/Flat Base
- Spindle base size: 76.2 x 53.6 mm (3.0 x 2.11")
- Spindle case height: 93.1 mm (3.66")
- Spindle centerline height above table: 44.5 mm (1.75")
- Spindle nose thread and taper: ER-16
- Bearings: Two 20 mm, class 5, lifetime lubricated ball bearings with adjustable preload
- Runout at spindle nose: 0.001″ (Most are within 0.0005″)
- End play (factory preload adjustment): 0.0002″ (0.0051 mm)
- Recommended continuous spindle speed: 4000 RPM or less
- Maximum spindle speed: 10,000 RPM
- Mounting provision: Two holes, 1/4-20, 2″ (50.8 mm) between centers on part centerline
- Alignment provision: 0.188″ wide by 0.110″ deep slot, 0.468″ to side of spindle centerline for 3/16″ alignment key
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.