Description
- 1x SparkFun GNSS Flex pHAT
- 1x SparkPNT GNSS Flex Module - mosaic-G5 P3
- 1x Tall GPIO Female Headers - 2x20 Pin
- 1x U.FL to U.FL Cable - 50mm
- 4x Aluminum Hex Standoff (Thread: M2.5-0.45; Length: 16mm)
- 8x Phillips Machine Screw (Thread: M2.5-0.45x8mm)
- 16.4 x 22.8 x 2.4 mm
- Standard 40-pin GPIO header for Raspberry Pi connectivity
- Dedicated USB-C port for high-speed data access
- microSD card slot for data logging
- Includes mounting hardware: standoffs, screws, and extended header
- Septentrio mosaic-G5 receiver with 6mm horizontal and 1cm vertical accuracy with RTK
- PPS timing resolution of 1.4ns and event-trigger accuracy less than 3ns
- AIM+ technology for interference mitigation
- Tracks signals from GPS, GLONASS, Galileo, BeiDou, QZSS
- Supports NMEA, RTCM v3.x, Septentrio Binary Format (SBF)
- Interfaces: UARTs, GPIO pins, PPS outputs, event inputs
- U.FL and SMA connectors for external antenna
- Voltage range: 3.135 to 3.465V
- Typical power consumption: 0.44W
- Channels: 789 simultaneous tracking
- Time to fix: Cold start less than 35s, warm less than 10s, reacquisition 1s
- Update rate: 20Hz, latency less than 10ms
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: