Description
- 1x SparkFun GNSS Flex pHAT - mosaic-G5 P3 & IM19 IMU
- 44.0 x 34.0 mm (1.73 x 1.34")
- Standard 40-pin GPIO header for Raspberry Pi connectivity
- Dedicated USB-C port for high-speed data access
- microSD card slot for data logging
- Includes Septentrio mosaic-G5 receiver with reduced size and power consumption
- Millimeter-level accuracy: 6mm horizontal and 1cm vertical accuracy with RTK
- PPS timing resolution of 1.4ns and event trigger accuracy below 3ns
- AIM+ technology for interference mitigation
- Tracks signals from GPS, GLONASS, Galileo, BeiDou, QZSS
- Intelligent tilt and dead reckoning with Feyman (FMI) IM19 IMU
- Survey-grade accuracy: Roll and pitch measurements accurate to within 0.05 degrees
- Tilt compensation
- Sensor fusion for continuous navigation solution
- Supports NMEA, RTCM v3.x, Septentrio Binary Format (SBF)
- Interfaces: Two hardware UARTs, two GPIO pins, two PPS outputs, two event inputs
- Pre-configured fusion with reconfigurable onboard jumpers
- U.FL connector for external antenna
- SMA connector bridged to U.FL connector
- Requires Raspberry Pi or similar single-board computer
Estimate shipping
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.